Skip to product information
KEY 500.1
  • KEY 500.1
  • KEY 500.1
  • KEY 500.1
  • KEY 500.1
KEY 500.1

Car Audio

KEY 500.1

Smart Mono Amplifier (bass revealer/processor)

Powered Sub 80 47KEY5001

The KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing).

AUTO EQ

Using KICKER’s supplied test tones (below), the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!

Start with these FREE TEST TONES for easy setup!

ALL THE CONTROL

Craft your sound with ease! The KEY500.1 comes with 24dB sub-sonic and low-pass crossovers, bass boost and gain controls.

HIDDEN TREASURE

Measuring about eight inches long and less than two inches high, the KEY500.1 fits nearly anywhere. Mount it behind your glove box, under the seat, or in your boot with ease.

START. DON’T STOP.

The amplifier also features FIT 2+™ (Fail-safe Integration Technology 2 PLUS) – which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.

SUGGESTED ENCLOSURES

KEY500.1 will work with all KICKER subwoofers up to 12 inches. See your sales associate for the ideal subwoofer in your particular system, because every system is unique.

4Ω = 150 Watts RMS
2Ω = 300 Watts RMS
1Ω = 500 Watts RMS

Remote Control

Your KEY500.1 amplifier is compatible with theCXARC remote control. Use it to customize your bass on the fly with just a turn of a knob!

Specifications

  • Power (watts/ch), 1 Ohm mono

    500

  • Power (watts/ch), 2 Ohm mono

    300

  • Power (watts/ch), 4 Ohm mono

    150

  • Standard dimensions in.(H x W x L)

    1-11/16 x 4-1/8 x 8-1/8

  • Metric dimensions cm(H x W x L)

    4.3 x 9.2 x 20.7

  • Frequency Response (Hz):

    10-160

  • Input Sensitivity:

    high level: 1V-40V / low level: 125mV-5V

  • Signal-to-Noise Ratio:

    >90dB, a-weighted, re: rated power

  • Selectable Electronic Crossover:

    Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz

  • What's in the Box:

    1 - fuse holder
    1 - manual and installation hardware

Available from leading retailers throughout New Zealand.

Find a New Zealand Kicker stockist!

 Where to buy